SOMMER/WICONA Security Element Facade RC4

The fair exhibit is based on a SOMMER/WICONA element facade with outwardly reinforced profiling and integrated external venetian blinds. The facade can be designed with or without openable elements. Shown is a coupling in the ceiling area (ceiling area only shown as an example) with integrated security requirement of class RC4 according to DIN/EN 1627 in the area of the elementised Sommer SOKALTHERM® construction (lower element [e.g. ground floor area]).

The security element facade can optionally be executed in the SOMMER/SOMMER or SOMMER/system house design.

The trade fair exhibit represents a transition area of a security element facade with the RC4 requirement to an element facade without security requirements.

Technical parameters:
Component security element facade SOMMER SOKALTHERM®

  • Supporting structure aluminium
  • SOMMER SOKALTHERM® G78 series
  • Aluminium profiles with very high recycling content, e.g. also possible from HYDRO CIRCAL 75R
  • Face widths or profile geometry in custom made design
  • Burglar resistance according to DIN EN 1627 up to RC4
  • Uf values > 1.2W/m²K, (Uf values vary depending on specific security requirements)
  • Air permeability according to DIN EN 12152/12153 class AE,
    DIN EN 12207/1026 class 4
  • Water tightness against driving rain according to DIN EN 12154/12155 class RE900,
    DIN EN 12208/1027 class 9A
  • Resistance to wind
    (nominal load) according to DIN EN 12179/13116 +2,000 Pa/-2,200 Pa,
    DIN EN 12210/12211 class C5
  • (safety load) according to DIN EN 12179/13116 +3,000 Pa/-3,300 PA,
    DIN EN 12210/12211 +-3,000 Pa

  • Impact resistance according to DIN EN 14019/12600 class I5/E5,
    DIN EN 13049/12600 class 3

  • Further possible safety variants or combinations are possible
    • Burglar resistance according to DIN EN 1627 up to class RC4 (tested)
    • Bullet resistance depending on agreement and object requirements
      (basic system tested according to DIN EN 1522 up to FB7)
    • Pressure wave resistance depending on project requirements and coordination

Combination possibilities of different requirements are almost unlimited - burglar resistance, bullet resistance, blast resistance. Security facade only possible from SOMMER profiles SOKALTHERM® or as a combination with profiles from other system houses.


Technical parameters:
Component standard facade Wicona 75
 

  • Aluminium support structure
  • Series based on WICONA WICLINE 75 from HYDRO CIRCAL 75 R
  • Face widths or profile geometry in custom made design
  • Uf values >1.1W/m²K
  • Air permeability according to DIN EN 12152/12153, DIN EN 1026/12207 up to class 4
  • Imperviousness to driving rain according to DIN EN 12154/12155, DIN EN 1027/12208 up to class 9A
  • Resistance to wind
    (nominal load) according to DIN EN 12179/13116, DIN EN 12211/12210 up to class C5/B5
  • Impact resistance according to DIN EN 14019/12600, DIN EN 13049 up to class 3

 

Unique combination variety - only at SOMMER